Post by cubano on Sept 14, 2016 10:51:36 GMT -5
My grandson has a 110cc Chinese atv. Don't know the brand. The gas tank was leaking so I replaced the tank. All I did was remove the handlebars & move the shroud forward to access the gas tank. When I put it all together, there is no spark to the spark plug. I have taken it apart & put back together 3 times & cannot find the problem. It was running great before I changed gas tanks. I have checked every wire & everything is connected. I have checked & rechecked the cut off switch. I am going to unplug the safety lanyard switch that's on the back frame bar to see if that gets me a spark. Don't know what else to check. Any suggestions?