Post by atvsunlspokane on Aug 22, 2013 21:27:27 GMT -5
I have 2 Chinese SUNL 200cc ATV's. They are 2007's and have had only a few problems. One of these is when I run the back roads in the Idaho Panhandle National Forest aand these hard ATV trails. Of course there is alot of vibration and knocking around. I have lost nuts and bolts here and there. Be sure to take the time and look at your ATV,s and put some lock-tite substance-even the cheap stuff- on your bolt threads that you can reach. Especially I found on the swing arm, exhaust pipe at engine and frame.These bikes are mssing alot of lock washers, regular washers and locktite material. This is not hard to do and will prevent any mishaps of bolts and screws falling off. If you do loose bolts your local harware store carries a high quality replacment. Donot waste your money on line. I have found there were alot of missing lock and regular washers missing. Also some of the bolts maynot have the shear strenght they should. Now the veticial motors that are 200cc and 250cc that are the CG type(CG200 ect) are put together really well.