|
|
Post by krueger on Mar 16, 2008 16:36:00 GMT -5
This is my 1st 4 wheeler  had i have issues... i Just got 250 phoenix maybe u can help me.. for some reason when i get it started and i put it in 1st then i start to release the cluth i start to move alittle, the it jumps forward the dies out this is my 1st atv and could use some help since for some reason the atv does not come with a owners manual, so am up in the dark.. i turned on the fuel underneath the tank , now al told me"the dealer" theres another one near the carb which if there is i don't see it. i need a new battery but thats not the problem when i get it started, just cant get it to move .. any help would be great.. thanks |
|
|
|
Post by BIGGKIDD on Mar 16, 2008 20:37:32 GMT -5
Krueger,
Welcome to the club. Sorry to hear your having problems.
My 2008 HiBird is geared kind of high. Your not just stalling it out are you? I know dumb question but I had to ask.
I need some more info to try and help you. Will it start and idle? Did you run it at idle for 30 or so min. to melt the crap they put in the carb to protect the float during shipping? Can you get some one to help get you going the first time maybe a push start? Post a time when you will be on and we can try to get together two heads are better than one.
Good Luck
Larry
|
|
|
|
Post by krueger on Mar 16, 2008 23:12:17 GMT -5
Krueger, Welcome to the club. Sorry to hear your having problems. My 2008 HiBird is geared kind of high. Your not just stalling it out are you? I know dumb question but I had to ask. I need some more info to try and help you. Will it start and idle? Did you run it at idle for 30 or so min. to melt the crap they put in the carb to protect the float during shipping? Can you get some one to help get you going the first time maybe a push start? Post a time when you will be on and we can try to get together two heads are better than one. Good Luck Larry from what i understand is that its possible running to lean and i need it to give gas once in gear. i will send you i video file i made on what i am doing... i have a 72 honda minibike where i have to just throttle down to switch gears... so this is all new to me on the ATV. and as well it seems that they put the screw to adjust mixer is a place where you reall can't get to .. i will be getting a new batter tomorrow, for some reason its not getting enough juice to turn over.... |
|
|
|
Post by krueger on Mar 17, 2008 11:25:46 GMT -5
Well i tried to do what u suggested and give t some gas while releasing the clutch to no luck, once i did that and gave gas it jumped and seemed to lock up. I am lost i should of just went with a automatic.. i will be taking the atv to a honda dealer this weekend so he can check it out and maybe figure out what is going on...  thanks for the help once again. will keep you posted on the results |
|
|
|
Post by krueger on Mar 18, 2008 21:13:00 GMT -5
Well finally i got it to work, was able to drive it which i am very happy... now my other issue is that i bought a new battery today and it started up no probelms. once i shut it down and tried to start up again i pressed the starter and i noticed my newutral light and my back light started to shutter on and off when it tried to start, the started just boggs , i actually have to jump the battery to gie it more juice, so i am think either the starter is messed up or there s some loose wiring, which i will be checking tomorrow.. thanks again for the help with getting me to move..
|
|
|
|
Post by atvsunlspokane on Aug 28, 2013 19:09:06 GMT -5
check the simple main fuse and make sure it isnt loose
|
|
had i have issues...
thanks for the help once again. will keep you posted on the results