Post by atvsunlspokane on May 23, 2014 22:37:15 GMT -5
I have two wonderful SUNL 200cc STA-200 ATV's. I have gone through them with a fine toothed comb to make them the machines they are.One thing I must ask you all to fix is an item related to your front wheel hubs. When looking at your Castle Nut that holds your hub in place,notice the washer that backs it up that goes aganst a sleeve that goes aganst your bearing. Well my rigs had a lock washer there the same size as the castle nut. Newer rigs may have a light sheet metal piece there now. You want to remove these items and replace them with a 8 grade steel washer about 11/4 inch in outter diameter. I had a bearing failure on the inner and outter bearing on one of my rigs. The bearings disintegrated and thus the hub came right across the castle nut and off the rig. Well over the cliff it went. Please get washers on these rigs!