|
|
Post by powersportsracing on Nov 14, 2007 10:26:10 GMT -5
Hello, if anyone has any questions and needs help. Just ask. I have been selling Chinese quads since 2003 and know a little  -Ron www.PowerSportsRacing.net |
|
|
|
Post by peternap on Nov 19, 2007 21:47:40 GMT -5
|
|
|
|
Post by tsamlin on Feb 22, 2008 23:18:41 GMT -5
Help I have a 2007 TaoTao 250 D it has a exahust leak where the pipe meets the motor
I trid to tighten it that did not work.
I took the exahust off and found a wire (that looks kind of like a twist tie only its not paper)
wrapped around the pipe on the end that goes into the motor.
What Should I do ? Do i rewrap it with the same wire ? Is there any other way to fix this leak ?
|
|
|
|
Post by BIGGKIDD on Feb 22, 2008 23:43:20 GMT -5
Welcome to the club! Can you take a picture and post of the pipe, this wire, and where the pipe meets the engine? Thanks Larry  |
|
|
|
Post by Tom on Feb 23, 2008 9:38:01 GMT -5
Not at this time because my kid dropped my digital cam and
it's broke too. Also I can't get the smiles to work it just comes up
as a D
|
|
|
|
Post by BIGGKIDD on Feb 23, 2008 10:27:11 GMT -5
sounds like my kind of luck If it was mine i would go to the local auto parts store and get some high temp gasket material and make a gasket.
good Luck
Larry
|
|
|
|
Post by tom on Feb 23, 2008 14:35:52 GMT -5
Thats funny I just got back from the auto parts store buying high temp rtv.
|
|
|
|
Post by tsamlin on Feb 23, 2008 23:15:29 GMT -5
Does anyone know if high temp rtv sealent can be used where the exhaust pip meets the motor as a gasket ? I found 600-700 degree stuff but have heard this spot can be 1200 degrees .
|
|
|
|
Post by BIGGKIDD on Feb 24, 2008 15:07:49 GMT -5
I don't think that will work there, But then again I have never tried. I was talking about cut to fit gasket material. If the auto parts stores don't have the high temp type try a local speed shop. Or you might go to a exhaust shop and find a gasket thats close enough in size to work. Where theres a will theres a way. Keep up the good work and let us know how it works out. Larry |
|
|
|
Post by tsamlin on Feb 25, 2008 23:51:59 GMT -5
I talked to the dealer who sold it to me. he said he will send me a new gasket when they get it next wk. I am thinking of asking him to sell me an extra clutch & cable & throttle cable and brake pads so I have them if I ever need them. What do you think ?
|
|
|
|
Post by BIGGKIDD on Feb 26, 2008 9:33:03 GMT -5
The best thing about having spare parts. If you have them on hand its like insurance. There it is but please never let me need it. I grab up spare stuff at every chance. So I would go for it. If you can keep up with the stuff its a good selling point also. Say when you get ready to sell you list your ATV and spares with a note that you had gotten this stuff if needed but never had to use it. But the parts come with it. Lots of people see that as a good thing. Not only that they have spares but must be a pretty good unit since they haven't been needed. Larry |
|
|
|
Post by jason on Mar 14, 2008 21:13:52 GMT -5
i got a cruz in 70cc four wheeler,from checkers,anyway i cant get it to idle.i took carb apart and cleaned it to.still dont work.i was thinkin of buying a mikuni for it.what size in mm is on stock.do you know what kind of motor it is.what are the adj on stock carb screws,a general idea on how many turns out .ive messed w/them so much i dont remember where they where!!! its brand new and i wish i would of bought a used name brand instead.
|
|
|
|
Post by soushman on Mar 23, 2008 13:50:49 GMT -5
Hey all hope I am posting this question in the right area,,, I just purchased a new ssr125cc ATV 2 weeks ago, the atv runs great, its still in the breakin period under 2 hrs on it, my question is the dealer told me its a 1 dwn and 3 up shift pattern, well what I have is 3 dwn and 1 up the 3 dwn is 1st, 2nd, 3rd, and the 1 up from nuetral is 4th, I posted this question on another site and someone told me there mite be a part installed wrong from the factory. I am just inquiring mite I look for something or change something b4 I call back the dealer? has anyone ever seen this or heard of this?? Thnx alot
|
|
|
|
Post by dragons715 on Apr 27, 2008 12:09:33 GMT -5
I purchased a Viva 200cc gorilla atv from nitro-motors.com excellent lots of bells and whistles but I recently heard a noise from the swing arm and the chain came off twice at 40 miles an hour might be the bearings. Do you know where I could buy parts to upgrade this atv, what does it resemble I want to put A arms on, exhaust, shocks and a swingarm but every site I goto they want to know what type of atv yamaha, honda, etc
|
|
|
|
Post by Jim on Feb 1, 2009 0:34:44 GMT -5
If anyone needs any Chinese atv or dirtbike parts,I can probally help,either I will have,or can direct you where to get.I can also help with any mechanical/electrical problems.I also have been importing/retailing/repairing chinese powersports for years,Please e-mail me at jstrehlow3@wi.rr.com,or call my cell # at 262-210-7509 Jim
|
|
